Advertisement
motor stops, pull out plug of power
supply, wait for the motor to cool
(about for 30 min), use again.
8. During operating, please do not
leave, never let children operate.
9. When this machine works in mixing,
mincing or grinding conditions, no-
loaded or over loaded work is strictly
prohibited.
10. After operation, do not pour the
food out until pull out the plug of
power supply.
11. Cutters are very sharp, in order to
avoid danger, when cleaning a cutter,
please put the cutter under water tap
for washing, do not wash it with hand.
12. This machine must not be used for
others beyond regulated purposes.
13. In case of damaged power supply
cord,
in
order
replacement must be performed by
the
manufacturer
department
or
persons.
14. Service life
putting into operation shelf life is
unlimited.
Performances
1. For the juicer with large diameter,
entire apple or pear can be put in for
juicing, no cutting apart needed, easy
and quick.
2. Design
is
fine,
beautiful, with combined structure,
easy to operate and clean.
3. High
speed
electric
overheating
protection
high efficiency, time saving, energy
saving, high service life of the motor.
4. Safety lock unit for switching is
specially designed, in order to make
sure safety and reliability in use.
Attention before using
1. This machine is set with safety unit,
when the handle does not fasten the
cover
or
the
fastened, the motor cannot turn, so as
to ensure safety for the user.
2. When disassembling or assembling
the juicer, press the upper of feed port
of the cover with your hand, then
to
avoid
danger,
or
its
service
similar
professional
4 years. Before
simple,
motor
is
adopted,
cutter
seat
is
force the handle to slide in or out of
cover slot.
3. When
first remove the cover and residue
barrel, then put up the middle ring by
holding juicing nozzle with your hand,
and take up, the juicing net will
automatically leave the rotor.
4. In order to avoid damage, before
using, first check power supply for
compliance with rated voltage.
5. Clean all parts able to disassemble
(refer to the section of "Maintenance
and cleaning").
6. When assembling, please carefully
read
position of main components".
7. Please
"attentions" before using.
Juicing
1. Before using, please confirm the
button switch of the main machine in
stop
assembly is not completed, starting
the main machine can be avoided, so
unnecessary damage for persons or
property avoided.
2. Before juicing, first confirm juicing
net and rotor clutched in position, and
no hard contact between juicing net
cutter and transparent cover. Put the
transparent cover on, put the handle
and
into the cover slot, then turn on the
machine.
3. For using, assemble according to
with
the diagram of "Name and position of
main components". Turn on power
supply, press switch to let the machine
run no-load for 5 sec. Put prepared
vegetable or fruit into feed port of the
juicer, press with the pushing bar,
evenly, hard and slowly, juice of the
vegetable
original, fresh, good for health.
4. Note: when pressing food with the
pushing bar, force shall be even or
not
indirect, pressing force shall not be
more than 1 kg, no too sudden force,
otherwise,
reduced.
4
disassembling
the
diagram
of
carefully
state,
in
this
or
fruit
can
juicing
effect
juicing net,
"Name
and
read
the
way,
in
case
be
found,
will
be
Advertisement
