Table of Contents
Advertisement
to make the following insulation resistance test to prevent the
customer from being exposed to a shock hazard.
2.2. Insulation resistance test
1. Unplug the power cord and short the prongs of the plug with a
jumper wire.
2. Turn on the power switch.
3. Measure the resistance value with an ohmmeter between the
jumpered AC plug and each exposed metal cabinet part, such as
screw heads, connectors, control shafts, handle brackets, etc.
Measurements should range from 4 MOhm to infinity for all
exposed parts.
3. OWNERS MANUAL
4. KEYBOARD RANGES
This keyboard features Touch Response, by which you control the volume by playing the keys
harder or softer.
Figure-1
Figure-2
5
Advertisement
Table of Contents
