Fluke C9970 User Manual page 7

(red and green)
Probe
tip
Check
contact
Accessories
The section below describes how to use some of the accessories available for use
with the Product. They may be purchased separately or as part of a kit.
Temporary Bond
The temporary bond (the Bond) is a heavy-duty insulated cord equipped with a
large clamp on one end and a small clamp on the other end. Use the Bond to
temporarily ground a light fixture, metallic conduit, power company hardware,
power ground wire, or other metallic object in a work space that could become
energized if a fault develops. If a fault develops, the temporary bond provides a
direct path to ground for the foreign potential.
If a fault develops while the Bond is connected to a metallic object, the
insulation may overheat and emit smoke. If the Bond overheats, avoid
contact with the Bond and immediately descend from the work if you
are aloft.
Figure 1. Features of the Product
LEDs
Conductive
end cap
Ground terminal
Flashguard
 Warning
Voltage Detector
Trigger
Instruction Belt
label clip
Accessories
5