ASROCK H310M-G/M.2 User Manual page 57

Command Slew Rate
Adjust Command Slew Rate for better signal. Default is 53 for IN, 89 for 2N.
Contorl Slew Rate
Adjust Control Slew Rate for better signal. Default is 53.
Clock Slew Rate
Adjust Clock Slew Rate for better signal. Default is 53.
MRS Setting
MRS tCL
Conigure the tCL for Memory MRS MR0.
MRS tWRtRTP
Conigure the tWRtRTP for Memory MRS MRC.
MRS tCWL
Conigure the tCWL for Memory MRS MR2.
MRS tCCD_L
Conigure the tCL for Memory MRS MR6.
Advanced Setting
ASRock Timing Optimization
Conigure the fast path through the MRC.
Realtime Memory Timing
Conigure the realtime memory timings.
[Enabled] he system will allow performing realtime memory timing changes ater
MRC_DONE.
Command Tristate
Conigure the Command Tristate Support.
Exit On Failure
Conigure the Exit On Failure for MRC training steps.
Reset On Training Fail
Reset system if the MRC training fails.
52