Introduction; Job Manager; Opening An Existing Job - Nikon DTM-302 Series Instruction Manual

5 Menu Key

Introduction

Use the MENU screen to access important
functions and settings.
To display the MENU screen, press the

Job Manager

Use the job manager to open, create, delete, and
manage jobs. To open the Job Manager, press
Job
select on the MENU screen.
If there are jobs stored on the instrument, the job
list appears, showing all the stored jobs. The
newest job is displayed at the top of the list.
If there are no jobs stored, the Create Job screen appears. See Creating a new job,
page 109.

Opening an existing job

The job list shows all the jobs stored on the
instrument, in descending date order.
The following symbols may be used to provide
extra information about jobs:
Symbol Meaning
* Current job.
@ Control job.
! Some of the job settings are different from the current job.
? Job was created in an older DB. Older files cannot be opened in
version 1.10 or later of the software.
Press [^] or [v] to move up or down the job list. Press
When you open a job, all job settings are automatically changed to match those used
in the open job.
108 Total Station DTM-302 Series Instruction Manual
[MENU] key.
5.2
[1] or
[ENT] to open the highlighted job.
5.1
52.1