Plow Specifications - Blizzard 680LT Assembly & Operation Manual

Plow Specifications

Moldboard
Length
680LT ..................................................................................6'-8"
720LT ..................................................................................7'-2"
Thickness ........................................................................16 Gauge
Height
680LT ..............................................................................21-1/2"
720LT ..............................................................................23-1/2"
Reinforcement ........................................................4 Ribs @ 3/16"
Cutting Edge ..........................................................1/4" x 5" (1080)
Finish ............................................................Powder Coat - White
Trip Mechanism
Trip Spring Type ..................................(4) 5/16" Hooked Extension
Trip Spring Adjustment ......................5/8"-11 x 4-3/8" Spade Bolts
A-frame
Material ................................................Rec. Tube & Channel Type
Hitch Pins........................................................3/4" x 6" Yellow Zinc
Finish..............................................................Powder Coat - Black
Pump
Construction ............................Steel Housing w/Clear Plastic Tank
Type ................................................................Internal Gear Pump
Size ......................................................................................0.7 cc
Motor ............................................................................12V Starter
Volume Per Minute ......................................0.8 GPM @ 1500 PSI
Weight ..................................................................................9.2 lb.
Mount ....................................A-frame Install w/Hex Head Screws
Reservoir Capacity ........................................................1.2 quarts
Controls ..................................................Toggle Switch & Joystick
Manifold
Construction ............................................Red Anodized Aluminum
Ports..............................................................................................4
Cartridge Valves............................................................................5
Relief Valve ..................................................................................1
Flow Control Valve ........................................................................1
Weight ................................................................................13.3 lb.
Mount ....................................A-frame Install w/Hex Head Screws
Maximum Flow Capacity....................................................2.0 gpm
18 Plow Specifications
Angle Cylinders
Stroke ..................................................................................7-5/16"
Ram Diameter........................................................................1-1/4"
Bore Diameter........................................................................1-1/2"
Lower/Raise Cylinder
Stroke ....................................................................................4-5/8"
Ram Diameter ..............................................................................1"
Bore Diameter........................................................................1-3/4"
Plow Headlights
Type ......................................................Low Profile w/Turn Signals
Measurements ............................................12" W x 5"H x 5-1/4"D
Housing ..............................................................Plastic Composite
Mount ..............................................................Adjustable Ball Type
Bulb Type........High/Low Sealed Beam Halogen, 12V Rectangular
Switch Type ....................................................Dash Mount, Toggle
Miscellaneous
Plow Weight*
680LT ..................................................................Approx. 355 lb.
720LT ..................................................................Approx. 370 lb.
Amperage Draw** ........................................................Approx. 65A
Adjustable Plow Shoes................................................(2) Standard
Mount Mechanism........................................Hydraulic Power Hitch
Control Station ..............................................Joystick or Touch Pad
*Plow weight does not include vehicle undercarriage.
**Amperage draw specifications are based on the snowplow lift operation, at a shop temper-
ature of 65˚F, using Blizzard Snowplow Rapid Action Hydraulic Oil. Amperage will vary with
temperature, oil viscosity and meter accuracy. Deadheading a plow function will result in
significantly increased amperage.
Unless otherwise indicated, all specifications are for the Model 680LT & 720LT straight blade
snowplows.
Blizzard Corporation reserves the right, under its Continuous Improvement Policy, to change
construction or design details and furnish equipment when so altered without reference to
illustrations or specifications.