Gigabyte GA-F2A88XM-DS2 User Manual page 20

DRAM Timing Selectable
Quick and Expert
Quick, Expert.
When using a non-XMP memory module or
will display as 1.50V. When
display the value based on the SPD data on the XMP memory.
The value displayed here is dependent on the CPU being used.
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
Channel A/B Timing Settings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset
Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
PC Health Status
Enabled Clears the record of previous chassis intrusion status and the
show "No" at next boot.
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
clear the chassis intrusion status record, set
the CMOS, and then restart your system.
CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
CPU/System Temperature
Displays current CPU/system temperature.
CPU/System Fan Speed
Displays current CPU/system fan speeds.
CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the CPU temperature. You can adjust
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Slope PWM item.
Disabled Allows the fan to run at full speeds.
Slope PWM
to Manual. Options are: 0.75 PWM value /
DRAM Timing Selectable is set to Quick or Expert. Note: Your system
C ~ 2.50 PWM value /
o
- 20 -
is set to Disabled, this item
is set to or , this item will
to Enabled, save the settings to
CPU Fan Speed Control is set
C.
o