Table of Contents
Advertisement
Features of your vehicle
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and
the corresponding lamp will
turn on.
When High Beam Assist is operat-
ing, high beam switches to low
beam if any of the following con-
ditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle
in front is detected.
- When the headlamp or tail lamp
of a motorcycle or a bicycle is
detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other
lights are detected.
Malfunction and limitations
Malfunction
OMQ4HQ010031R
When High Beam Assist is not work-
ing properly, the 'Check High Beam
Assist (HBA) system' warning mes-
sage will appear and warning light
(
) will illuminate on the cluster.
We recommend that you have your
vehicle inspected by an authorised
Kia dealer/service partner.
Limitations
High Beam Assist may not work
properly in the following situations:
Light from a vehicle is not
detected because of lamp dam-
age, or because it is hidden from
sight, etc.
Headlamp of a vehicle is covered
with dust, snow or water.
A vehicle's headlamps are off but
the fog lamps are on and etc.
There is a lamp that has a similar
shape as a vehicle's lamp.
Headlamps have been damaged or
not repaired properly.
Lighting
5
5
145
Advertisement
Chapters
Table of Contents
