Kia Sorento 2022 Manual page 224

Features of your vehicle
5. If you change the shift dial to a
position other than R (Reverse),
or change the rearview mirror
selector lever to the neutral posi-
tion, and the automatic return of
the mirror is finished, the
adjusted angle will be automati-
cally saved.
6. You can adjust the rearview mir-
ror on the other side by following
the same procedures (1-5).
How to initialise auto reverse user
settings
If you want to change the automatic
control function of rearview mirrors
to factory-default conditions, follow
the steps below.
1. Position the shift dial to P (Park).
Make sure that the vehicle is
stopped and the mirror is not
working.
2. Choose the mirror to be adjusted
by positioning the lever to L (left)
or R (right).
3. Step on the brake pedal and turn
the shift dial to R (Reverse).
4. When the downward movement
of the rearview mirror is finished,
press the switch ▲ to locate the
mirror in the position higher than
before (P, N or D).
(Adjust the mirror in the higher
position compared to its position
in the driving mode)
5 70
5. It is initialised when the shift dial
is changed to a position other
than R (Reverse), or the rearview
mirror selector lever is changed to
the neutral position. (Initialised
position will be applied from next
operation)
6. You can initialise settings for the
mirror on the other side by fol-
lowing the same procedures (1-
5).
CAUTION
We recommend following the proce-
dures in an orderly manner to
change or initialise the auto revers-
ing user settings.
If you move to the next step before
completing the previous one, the
changed angle may not be changed
or initialization may not work prop-
erly
Mirrors