Smart Centre - Bush DLED65UHDHDRS Instruction Manual

Advanced features
Getting the most from your TV
the OK button. Fill in the blanks for Name and Address,
highlight OK and press the OK button to add. Whilst you
are on the site you wish to add to the Speed Dial list,
highlight the Vewd button and press the OK button. Then
highlight Add to Speed Dial option in the submenu and
press the OK button again. Name and Address will be
filled automatically according to the site you are visiting.
Highlight OK and press the OK button to add.
You can also use the Vewd benu options to manage the
browser. Highlight the Vewd button and press the OK
button to see available page specific and general options.
There are various ways to search or visit websites using
the web browser.
Enter the address of a website(URL) into the search/
address bar and highlight the Submit button on the
virtual keyboard and press the OK button to visit the site.
Enter keyword/s into the search/address bar and
highlight the Submit button on the virtual keyboard
and press the OK button to start a search for the related
websites.
Highlight a Speed Dial thumbnail and press the OK
button to visit the related website.
Your TV is compatible with USB mice. Plug your mouse
or wireless mouse adaptor into the USB input of your TV
for easier and quicker navigation.
Some web pages include flash content. These are not
supported by the browser.
Your TV does not support any download processes
from the internet via the browser.
All sites on the internet might not be supportted.
According to the site; content problems may occur.
In some circumstances video contents might not be
able to be played.

Smart Centre

Smart Centre is a mobile application running on iOS and
Android platforms. With your tablet or phone, you can
easily stream your favourite live shows and programmes
from your smart TV. Also; you can launch your portal
applications, use your tablet as a remote control for your
TV and share media files.
Note: Being able to use all functions of this application
depends on the features of your TV.
Getting Started
To be able to use internet based features, your modem/
router must be connected to the internet.
IMPORTANT: Make sure the TV and mobile device are
connected to the same network.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
40 Advanced features
For media sharing feature Audio Video Sharing option
should be enabled(if available). Press the Home button
on the remote, select Settings>System>More menu and
press OK. Highlight Audio Video Sharing and change
as Enabled. Your TV is ready to connect to your mobile
device now.
Install the Smart Centre application onto your mobile
device.
Start the smart centre application. If all connections are
configured properly, you will see your TV's name on your
mobile device. If your TV's name doesn't appear on the
list, wait a while and tap on the Refresh widget. Select
your TV from the list.
Mobile Device screen
On the main screen you can find tabs to access various
features.
The application retrieves actual channel list from TV first
when it starts.
MY CHANNELS: The programmes of first four channels
from the channel list retrieved from the TV are shown.
You can change the listed channels. Press on the channel
thumbnail and hold. A list of channels will be displayed
and you can choose your desired channel to be replaced.
TV: You can watch content through the TV tab. In this
mode you can navigate through the channel list retrieved
from your TV and click on thumbnails to view the detail
pages.
RECORDINGS: You can view your active recordings(if
available) and reminders through this tab. To delete any
item, simply press on the delete icon found on each row.
EPG (Electronic programme guide): You can view the
broadcast schedules of selected channel lists through this
tab. You can also navigate through channels by pressing
on the selected channel on the EPG grid. Please note
that updating / refreshing the EPG information may take a
while depending on your network and web service quality.
Note: Internet connection is required for WEB based EPG
informations.
SETTINGS: Configure the application to your liking. You
can change;
Auto-lock (Only in IOS): The screen of the device
automatically turns off after a certain amount of time.
Default is off, which means the screen will always stay
on.
Auto-enable FollowMeTV: FollowMeTV function (if
available) will start automatically when this setting is
enabled. Default is disabled.