Table of Contents
Advertisement
Advanced features
Getting the most from your TV
Sound Menu Content
Dolby Audio
DTS TruSurround HD
Sound Output
Audio Link
AVL (Automatic Volume
Limiting)
Advanced Settings
Equalizer
Bass Gain
DTS DRC
Sound Mode
Digital Out
Headphone/Lineout
Headphone
Reset
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
30
Advanced features
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other
than Off.
Enables or disables the DTS TruSurround HD.
Sets the sound output preference. TV, S/PDIF and HDMI ARC options will be available.
There will be no sound output except through the selected option. If HDMI ARC option
is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as grayed out
and will be unavailable.
Press OK to open the Audio Link menu screen. Using this screen you can discover and
connect the sound devices to your TV wirelessly.
Sets the sound to obtain fixed output level between programmes.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options
will change. Auto, Night, Normal and Off options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the TV switches to Night mode for the first time after setting this option as Auto,
an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Controls the bass gain level. Use Left or Right button to set.
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or Off.
You can select a sound mode (If the viewed channel supports).
Sets digital out audio type. This option will not be available if the Sound Output option
is not set as S/PDIF.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Headphone, the output from the headphone socket will be set to maximum
which could damage your hearing.
Sets headphone volume. This option will not be available if the Headphone/Lineout
option is not set as Headphone.
Please ensure before using headphones that the headphone volume is set to a low level,
to prevent damage to your hearing.
Resets some of the sound settings to factory defaults.
Advertisement
Table of Contents
