Link Indicators - iLive 1407-0603-09 User Manual

What does it mean to Pair?
Pairing the base station with a wireless
speaker allows the base station to recognize
that wireless speaker. Once paired, the base
station will remember that wireless speaker and
transmit audio through it.

Link Indicators

Off
Powered off.
Slow Flashes
Standby mode.
Quick Flashes
Attempting to pair.
Solid Light
Paired and playing.
If the base station is not playing audio, either from
the dock for iPod or the Auxiliary input, then both
the base station and wireless speakers will go into
Standby mode. Once you begin playing audio from
the base station, both the base station and wireless
speaker will come out of Standby mode.
Transmission Range
Once the base station is paired with a wireless
speaker, the wireless speaker can be moved
approximately 200ft (line-of-sight) or 90ft
(indoors) and still receive audio from the base
station.
Results will vary depending on the number and
size of obstructions between the base station and
the wireless speaker.
How many speakers can I pair to
one base station?
Up to 20 wireless speakers can be paired with
one base station. Additional speakers are sold
separately.
CUSTOMER HELPLINE | 1-314-621-2881
PAIRING THE WIRELESS SPEAKERS WITH THE BASE STATION
Pairing
The two wireless speakers included in the same
box as the base station are pre-paired with that
base station. Any additional speakers will need to
be paired by following the directions below.
When pairing the base station with a wireless
speaker you will need to press the Pair button
on the base station and wireless speaker
simultaneously. Because of this, you will need to
have both the base station and wireless speaker
within reach when you pair them.
1. Plug the base station into a power source,
and press the Power button to power the base
station on.
The base station Link Indicator will flash when
the base station is powered on.
2. Plug the wireless speaker into a power source
or insert 6 D batteries, not included, and press
the Power button to power the wireless speaker
on.
The wireless speaker Link Indicator will flash
when the wireless speaker is powered on.
3. Adjust the Volume on the wireless speaker to
approximately the half-way point between min.
and max volume.
4. Simultaneously press and hold the Pair button
on the base station and the Pair button on the
wireless speaker for 5 seconds.
5. The wireless speaker will emit a long beep
when it is paired with the base station.
If the wireless speaker emits short repeating
beeps, it was not able to pair with the base
station. Repeat steps 1-4 until you hear the
long beep.
After pairing, the wireless speaker may take up to
30 seconds to begin playing audio from the paired
base station.
Repeat steps 1-4 for each additional wireless
speaker you want to pair with the base station.
iLive | IS809B 9