10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. iLive | IS809B • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seule- ment par le même type de pile ou l’équivalent.
• Digital clock • Play/pause, skip up/down functions for iPod • On/Off, mute, function and pairing controls • Independent volume settings for each speaker • Transmission range: up to 200ft (line of sight) and 90ft indoors • Auxiliary input for iPod shuffle and other audio devices • AC power: built-in AC cord • DC power: requires 6 D batteries per speaker, not included iLive | IS809B...
Page 4
POWERING THE BASE STATION AND REMOTE Base Station AC Power Power the base station by connected it to a standard AC outlet using the attached AC power cord. Remote Requires 2 AAA batteries (not included). Power the remote by inserting 2 AAA batteries into the battery compartment on the back of the remote. iLive | IS809B Base Station Battery Backup Requires 2 AAA batteries (not included). The battery backup is meant for keeping the clock and timer settings during short unexpected power outages. The unit’s other features cannot function off of the battery backup alone.
Page 5
After extending the AC cord out from the battery compartment, snap the battery compartment door back into position to keep the internal elements of the wireless speaker from being exposed. Wireless Speaker DC Battery Power Requires 6 D batteries (not included). CUSTOMER HELPLINE | 1-314-621-2881 iLive | IS809B...
Press and hold to search forwards or backwards through an individual track on a docked iPod. iLive | IS809B Timer Dock for iPod Press and hold to set Use to connect an iPod the timer. to the wireless speaker system.
Bass Press to adjust the level of bass output from the linked speakers. Volume Press to adjust the volume of the unit. Special Note The included remote is wireless and does not require line-of-sight to control the unit. The wireless remote can control the unit from approximately half the distance of the speaker reception. (Approximately 100ft line-of-sight, or 45ft indoors depending on location) iLive | IS809B...
Page 8
Power Press to turn the speaker off and on. Battery Compartment Requires 6 D batteries, not included. iLive | IS809B AC Power Cord Use to connect the wireless speaker to a standard AC outlet. Link Indicator Indicates the current status of the wireless speaker’s link with the...
5. The wireless speaker will emit a long beep when it is paired with the base station. If the wireless speaker emits short repeating beeps, it was not able to pair with the base station. Repeat steps 1-4 until you hear the long beep. After pairing, the wireless speaker may take up to 30 seconds to begin playing audio from the paired base station. Repeat steps 1-4 for each additional wireless speaker you want to pair with the base station. iLive | IS809B...
Page 10
Television mini-phono 3.5mm Cable - RCA R/L Audio Cable (not included) Stereo System mini-phono 3.5mm Cable - RCA R/L Audio Cable (not included) iLive | IS809B Setting the Timer 1. Press and hold the Timer button. 2. While holding the Timer button, press the Skip/Search buttons to adjust the hour and minute. 3. Release the Timer button to set the adjusted timer. 4. Press the Source button to select iPod or Auxiliary mode. An iPod must be docked, or an audio source must be connected to the Auxiliary input when the set time is reached.
When placing multiple wireless speakers in close proximity to one another, set half of the speakers to Left and the other half to Right. This will create a stereo audio output. When a single wireless speaker is set in a location, adjust the Left/Right/Mono dial to Mono. Resetting the Unit Resetting the base station is the quickest and most effective way to solve small unexpected problems with the base station’s behavior. 1. Using a paperclip or like object, press the Reset button to reset the base station to it’s original settings. Please note, resetting the base station will not unpair any of the wireless speakers from the bast station. OPERATIONS iLive | IS809B...