ViewSonic XG2407-7 User Manual page 36

1
1ms mode <MPRT>
Choose whether to activate Moving Picture Response Time (MPRT); default
setting is Off.
NOTE:
1. Make sure Input Timing detection is >100Hz to turn on 1ms Mode
from default.
2. If 1ms Mode is set to "On", when turning on FreeSync, MPRT will
automatically turn off.
3. When 1ms Mode is set to "On", the following functions will be
grayed out and disabled: Brightness, Advanced DCR, Eco Mode,
sRGB, Response Time, DDC/CI Brightness adjustment.
4. sRGB and 1ms Mode will disable each other.
5. The IC controls Moving Picture Response Time, so the overall
Brightness will be dark.
6. 1ms MPRT spec is based on internal testes. Response time may
vary depending on test conditions.
36