Using The Ih27 - iHome iH27 User Manual

Using Sleep Mode
a) Press the Sleep Button while the iPod is playing to enter sleep mode, and continue to press to step through the available
sleep times: 90, 60, 30 or 15 minutes. The sleep mode icon will appear on the display. The iH27 will play for the number of
minutes set, growing gradually softer until shutting off both the unit and the iPod at the set time. Press the Volume Up or Down
controls to set your own sleep volume. Sleep volume setting is separate from your alarm or regular listening volume selection.
Using the Line-in Jack
a) An audio patch cord comes with the iH27. Use it to play nondocking iPods or other audio devices through the iH27
Jack (one end in the device's line out or headphones jack, the other in the iH27 line in jack). Make sure there is no iPod docked
in the iH27 when using the line-in jack. Press the iPod Button.
Using Dimmer
a) Press the Snooze/Dimmer Button during normal operation to adjust the brightness of LCD display. While operating on AC
current, the switch will toggle between high, medium, low and off settings. In battery mode, the display is off by default. Press
once to activate the display for about 3 seconds.
Using the Travel Lock
a) You can disable the iH27 controls to avoid turning on the device or changing settings while in transit and to save battery life
during extended periods of non-use. To do so, move the
icon position. A Lock Icon
to the Remote positon to restore normal function with remote control capability, or to the Off position to restore function with the
remote disabled.
Using the SRS WOW switch
a) Press the
This circuitry is designed to provide a broader audio image with enhanced low range and mid range sound reproduction to bring
added life to compressed MP3 files. The SRS icon will appear in the display when SRS is active. Press switch again to disable
the SRS WOW effect.
Using the AV out Jack
a) To output iPod audio video signal from the iH27 to a TV, computer or other device, connect an iPod AV cable (not included)
from the AV out jack on the back of the iH27 to the AV input on your TV or other device. For use as an audio-only line out,
you can connect the included audio patch cord from the AV out jack to the audio in jack of another device.
NOTE: Speakers in the iH27 are not shielded. To avoid possible damage to your TV or monitor from the speaker magnets, do
not place the iH27 directly on or next to a TV or CRT monitor.
l.
will appear on the display indicating the unit is locked and controls are inactive. Move the switch
SRS WOW switch located on the right side of the unit to enable the SRS WOW sound enhancement circuitry.

Using the iH27

Travel Lock Switch (located on the back of the unit) to the Locked
4
Line-in