Specifications; Generator Operation - K&S BASIC KSB 10i Owner's Manual

Model
Voltage, V
Maximum power, kW
Nominal power, kW
Frequency, Hz
Current, A (max.)
Outlets
Engine start
Fuel tank volume, l
Noise level Lpa (7m)/Lwa, dB
Engine model
Engine volume, cm
3
Engine type
Engine power, hp
Power factor, cos φ
Dimensions (L*W*H), mm
Net weight, kg
Protection class
*Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical condition of the
generator.
To ensure reliability and increase the engine service life, peak powers may be slightly limited by circuit breakers.
The optimal operating conditions are ambient temperature of 17-25°C, barometric pressure of 0.1 MPa (760 mm Hg),
and relative humidity of 50-60%. Under these environmental conditions, the generator can provide maximum perfor-
mance in terms of the declared specifications.
In the event of deviations from these environmental indicators, the generator performance may vary.
Please note that continuous loads exceeding 80% of the generator's rated power are not recommended in order to
extend its service life.
Before starting the device, remember that the total power of the connected power consumers should not exceed the
nominal power of the generator.
GENERATOR TRANSPORTATION GENERATOR TRANSPORTATION
Before you start to transfer the generator, please ensure to turn off the engine and give it some time to cool. Transport
the generator with a handle, do not rush.
Nominal voltage tolerance – max. 5%
TERMS OF USE OF INVERTER GENERATOR

GENERATOR OPERATION

SPECIFICATIONS

KSВ 10i
230
1.0
0.8
50
4.3
1*16А
manual
3.5
70/95
KSB 80i
42.7
gasoline powered one-cylinder, two-stroke
2.0
1
320*250*330
8.5
IP23M
www.ks-power.de/en
3
4
5
| 3