Table of Contents
Advertisement
Flake Ice Machines
Cleaning Stainless Steel
Commercial grades of stainless steel are susceptible to rusting. It is important that you
properly care for the stainless steel surfaces of your ice machine and bin to avoid the
possibility of rust or corrosion. Use the following recommended guidelines for keeping your
stainless steel looking like new:
1. Clean the stainless steel thoroughly once a week. Clean frequently to avoid build-up
of hard, stubborn stains. Also, hard water stains left to sit can weaken the steel's corrosion
resistance and lead to rust. Use a nonabrasive cloth or sponge, working with, not across, the
grain.
2. Don't use abrasive tools to clean the steel surface. Do not use steel wool, abrasive
sponge pads, wire brushes or scrapers to clean the steel. Such tools can break through the
"passivation" layer - the thin layer on the surface of stainless steel that protects it from
corrosion.
3. Don't use cleaners that use chlorine or chlorides. Don't use chlorine bleach or
products like Comet to clean the steel. Chlorides break down the passivation layer and can
cause rusting.
4. Rinse with clean water. If chlorinated cleansers are used, you must thoroughly rinse the
surface with clean water and wipe dry immediately.
5. Use the right cleaning agent. The table below lists the recommended cleaning agents
for common stainless steel cleaning problems:
Cleaning Activity
Routine cleaning
Removing grease or
fatty acids
minutes.
Removing hard water spots
and scale.
Cleaning Agent
Soap, Ammonia, Windex, or
detergent with water.
Fantastik, 409 Spic'nSpan
Liquid are also approve for
Stainless Steel.
Easy-Off or similar oven
cleaners.
Vinegar
Page B4
Cabinet Care
Method of Application
Apply with a clean cloth
or sponge. Rinse with
clean water and wipe dry.
Apply generously, allow
to stand for 15-20
Rinse with clean water.
Repeat as required.
Swab or wipe with clean
cloth.
Rinse with clean water
and dry.
Hide quick links:
Advertisement
Table of Contents
