Wheel Attachment Faces; Wheel Bolts - Porsche 911 Turbo 2014 Owner's Manual

14_991_Turbo_21.book Seite 257 Mittwoch, 9. April 2014 2:19 14
Do not grease wheel attachment face B

Wheel Attachment Faces

NOTICE
There is a risk of damage to the wheel and wheel
attachment face.
f
The wheel attachment face B on the brake disk
and on the wheel itself must not be greased.
f
Only the areas A may be greased. Grease
these areas very thinly with Optimoly
Do not use any other grease/paste.

Wheel Bolts

f
Always clean the wheel bolts before fitting.
f
Wheel bolts must not be greased.
f
Replace damaged wheel bolts.
Only use genuine Porsche wheel bolts
assigned especially to this model or wheel
bolts of similar quality that have been
manufactured according to Porsche
specifications and production requirements.
Tightening torque
Tightening torque for wheel bolts: 160 Nm
(118 ftlb.).
®
TA.
Security wheel bolts
The adapter (wrench socket) for the security
wheel bolts is stored in the tool box in the luggage
compartment.
f
If the wheels have to be removed at the
workshop, do not forget to hand over the
socket for the security wheel bolts along with
the car key.
f
To loosen or tighten the wheel bolt with anti-
theft protection, the adapter must be used
between the wheel bolt and the wheel bolt
wrench.
f
When positioning the wrench socket, ensure
that it engages fully in the teeth of the wheel
bolt.
Minor Repairs
257