Initial Setting
1. Connect the AC adaptor.
2. Connect the pedal (SP-3 or SP-32).
Even if a pedal unit is unavailable for the test, all the tests except for the pedal check may be performed.
* SP-3 is the pedal unit that comes with PX-330.
Connect it to the DAMPER PEDAL jack or the SOFT/SOSTENUTO PEDAL jack in the back of the
main unit.
* SP-32 is a pedal unit sold separately.
Connect it to the pedal connector on the bottom of the main unit.
To use SP-32, you will need the stand CS-67P, sold separately.
3. "Main" volume: MAX
4. Have a PC and a USB cable ready. (They will be used in the USB check.)
Operating System:
How to start the diagnostic program
1. Hold down the "FUNCTION", "
After the diagnostic program is launched, Sub CPU ROM check will start.
The message below appears on the LCD.
TestMode MX901
SubCPU COM OK
2. Release the "FUNCTION", "
Be sure to turn off the power when the test is finished.
DIAGNOSTIC PROGRAM
®
Windows
XP (SP2 or later) *1
®
Windows Vista
®
Windows
7 *3
®
Mac OS
X (10.3.9, 10.4.11 or later,
*1: Windows XP Home Edition/Windows XP Professional (32 bit)
*2: Windows Vista (32 bit)
*3: Windows 7 (32 bit, 64 bit)
/ NO" and "
/ NO" and "
*2
10.5.6 or later, 10.6.6 or
/ YES" buttons at the same time, to turn the power ON.
/ YES" buttons.
– 42 –
later)