Table of Contents
Advertisement
7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-9. First install B10 candelabra bulbs (40
Watt Maximum) into the sockets.
7-10. Thread the pull chains through the hole
in the center of the glass bowl.
7-11. Thread the fan pull chain through the
hole in cover plate. Thread the light pull
chain through the finial.
7-12. Screw the finial onto the threaded rod
end until tight.
7-13. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the plastic breakaway connector.
(You may find the plastic breakaway
connector on the end of the extra
chain.)
Note: In compliance with US federal energy
regulations this ceiling fan contains
a device that restricts the light kit to
a maximum of 190 Watts. Exceeding
that limit or the marked limit on this
product may result in fire hazard or
improper operation.
Light Bulbs
(B10
Candelabra
Base 40 Watt
Maximum)
Threaded
Rod
Glass Bowl
Cover Plate
Breakaway
Connector
12
42663-01 • 10/23/08 • Hunter Fan Company
Breakaway
Finial
Connector
Advertisement
Table of Contents
