Hunter 42786-01 Owner's Manual And Installation Manual page 12

7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-13. First install B10 candelabra bulbs (60 Watt Maximum) into
the sockets.
7-14. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may find the
plastic breakaway connector on the end of the extra chain.)
7-15. Thread the fan pull chain (coming from the side of the light
kit) down through the closest hole in the metal disc. Then,
thread the fan chain through the bottom of the glass bowl,
and finally through the grommet hole in the cover plate.
7-16. Thread the light pull chain (coming from the center of the
light kit) through the bottom of the glass bowl and the center
of the cover plate.
7-17. Place the cover plate up against the glass bowl. Align the holes
in the cover plate and glass bowl.
7-18. Thread the light pull chain through the center of the finial.
7-19. Screw the finial onto the threaded rod end until tight.
7-20. Attach the extra pull chain (included) to the light pull chain
using the plastic breakaway connector. (You may find the
plastic breakaway connector on the end of the extra chain.)
Note: In compliance with US federal energy
regulations, this ceiling fan contains a device
that restricts the light kit to a maximum of
190 Watts. Exceeding that limit or the marked
limit on this product may result in fire hazard
or improper operation.
12
42786-01 • 08/14/09 • Hunter Fan Company
Connector
Fan Pull Chain
Breakaway
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Disc
Threaded Rod
Light Pull Chain
Glass Bowl
Cover Plate
Finial