Log File; Related Commands - HP LCS60 Installation Manual

Log File

The log file, ppp.log, is written to by the LCS60 PPP server and contains informa-
tion about incoming PPP call requests. To display the contents of the log file, use
the page command as shown in the example below:
# pg /usr/adm/lcs/ppp.log
Fri Feb 16 11:32:55 13714
inbound.54.6 ch=508 uid=tbaker rqst_reserved=1
Fri Feb 16 11:34:22 13714
Tue Feb 20 13:34:25 13714
yardnac.65.3 ch=510 uid=pdavison rqst_reserved=1
Tue Feb 20 13:40:01 13714
Tue Feb 20 13:54:49 13714
yardnac.65.3 ch=510 uid=pdavison rqst_reserved=1
Tue Feb 20 15:42:47 13714
yardnac.65.3 ch=508 uid=troughtn rqst_reserved=1
Tue Feb 20 15:51:52 13714
Tue Feb 20 15:52:45 13714
yardnac.65.3 ch=508 uid=troughtn rqst_reserved=1
Tue Feb 20 15:54:12 13714
Wed Feb 21 08:33:52 13714
Wed Feb 21 08:33:53 13714
Wed Feb 21 10:32:25 489
Wed Feb 21 10:32:25 489
Wed Feb 21 11:04:15 388

Related Commands

The following commands may be of particular interest when administering the
LCS60's PPP service:
ping
netstat
The manual pages for these commands are contained in Appendix E of this docu-
ment; they are also available online.
Issue 3
[3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
[3] ppp1 DEL 1.1
[3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
[3] ppp1 DEL 1.1
[3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
[3] ppp1 NEW 1.3 dkserver=morse dk=mlkway/earth/ \
[3] ppp1 DEL 1.3
[3] ppp1 NEW 1.4 dkserver=morse dk=mlkway/earth/ \
[3] ppp1 DEL 1.4
[3] ppp1 DEL 1.1
[3] ppp1 exited
[3] ppp1 started loglevel = 3
[3] ppp1 nfiles=256
[3] ppp1 p3m received HANGUP for protocol: 802b
ipxping atping
ipxnetstat atnetstat
Administration
4-21