Special Cord Set Instructions & Cautions; Introduction - Mr. Coffee ECMP2 Operating Instructions Manual

The pump espresso/cappuccino maker
Hide thumbs Also See for ECMP2:
Table of Contents

Advertisement

SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in or tripping over a longer cord.
2. An extension cord may be purchased and used if care Is exercised in
Its use.
3. If an extension cord is used, the marked electrical rating of the exten-
sion cord must be at least 10 amps and 120 volts. The resulting
extended cord must be arranged so that It will not drape over the
counter top or table top where It can be pulled on by children or
tripped over accidentally.
Note:
This appliance has a polarized plug (one blade is larger than the
other). As a safety feature, this plug will fit in a polarized bullet
only one way. If the plug does not fully fit in the outlet, reverse
the plug. If it still does not fit, contact a
not attempt to defeat this safety feature.
CAUTION:
1) Do not remove the filter holder at any time during
the brewing process.
2) Do not let the pump run with an empty water container.
This can damage the pump permanently.
3) Use caution removing the filter holder from the brew
head. The metal parts may still be very hot. Also, there
may be hot water floating on the top of the filter basket.
4) When using the frothing tube make sure the tip of the
tube is submerged In liquid before turning the steam
selector control knob to the "ON" position.
All manuals and user guides at all-guides.com
electrician. Do

Advertisement

Table of Contents
loading

Table of Contents