Advertisement
HFH110/111/111T/WF11007EM1.qxd
1/31/07
16:29
Page 2
P L E A S E R E A D A N D S AV E T H E S E
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
Thank you for purchasing this Holmes
®
product. We
9. DO NOT insert or allow foreign objects to enter any
understand the value of quality and are committed to
ventilation or exhaust opening as this may cause an
making superior products that stand the test of time. We
electric shock or fire, or damage the heater.
trust this product will exceed your expectations of quality
10. DO NOT operate heater with a damaged cord or
and reliability. We hope that you enjoy this product and
plug, or after the heater malfunctions, has been
dropped or damaged in any manner. Return
will consider purchasing another Holmes
®
product in the
appliance to manufacturer for examination, electrical
future.
or mechanical adjustment, or repair.
To see our full product line or if you have any questions or
11. A heater has hot and arcing or sparking parts inside.
comments about this product, please visit our website at:
DO NOT use it in areas where gasoline, paint, or
www.holmesproducts.com.
flammable liquids are used or stored.
When using electrical appliances, basic safety precautions
12. Use appliance only for intended household use as
should always be followed to reduce the risk of fire, electric
described in this manual. Any other use not
shock, and injury to persons, including the following:
recommended by the manufacturer may cause fire,
1. Read all instructions before using the appliance.
electric shock, or injury to persons. The use of
2. To avoid fire or shock hazard, plug the appliance
attachments not recommended or sold by the
directly into a 120V AC electrical outlet.
manufacturer may cause hazards.
3. The heater is hot when in use. To avoid burns, DO
13. DO NOT use outdoors.
NOT let bare skin touch hot surfaces. If provided, use
14. To prevent a possible fire, DO NOT block air intakes or
handles when moving this heater. Keep combustible
exhaust in any manner. DO NOT use on soft surfaces,
like a bed, where openings may become blocked.
materials, such as furniture, pillows, bedding, papers,
15. To disconnect heater, turn controls to OFF, then
clothes, and curtains at least 3 ft (0.9 m) from the
front of the heater and keep them away from the
remove plug from outlet.
sides and rear.
16. Avoid the use of an extension cord because the
extension cord may overheat and cause a risk of fire.
4. DO NOT run cord under carpeting. DO NOT cover
However, if you have to use an extension cord, the
cord with throw rugs, runners, or the like. Arrange
cord shall be No. 14 AWG minimum size and rated
cord away from traffic area and where it will not be
not less than 1875 watts.
tripped over.
17. If the heater will not operate, see specific instructions
5. This heater is not intended for use in bathrooms,
on Auto Safety Shut-off.
laundry areas and similar indoor location. NEVER
18. DO NOT attempt to repair or adjust any electrical or
locate heater where it may fall into a bathtub or
mechanical functions on this unit. Doing so will void
other water container.
your warranty. The inside of the unit contains no user
6. Extreme caution is necessary when any heater is
serviceable parts. All servicing should be performed
used by, or near children or invalids, and whenever
by qualified personnel only.
the heater is left operating and unattended.
19. Discontinue use if plug or outlet is hot. It is
7. Always unplug the heater when not in use.
recommended that the outlet be replaced if plug or
8. When unplugging, be sure to pull by the plug and
outlet is hot to touch.
not the cord.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in
a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
F E AT U R E S - O P E R AT I O N S
PLEASE READ AND SAVE
PRE-OPERATING INSTRUCTIONS
1. Carefully remove your heater from the box. Please
THESE IMPORTANT SAFETY
save the carton for off-season storage.
INSTRUCTIONS
2. Make sure the unit is in the OFF position before
plugging the heater into the outlet.
3. Place heater on firm level surface.
4. Avoid overloading your circuit by not using other
TECHNICAL SPECIFICATIONS
high wattage appliances in the same outlet.
• Wattage: 1500W (+5% –15%)
• Working voltage: 120V AC/60Hz
OPERATING INSTRUCTIONS
1. Turn the Selector Control to desired heat setting LO
AUTO SAFETY SHUT-OFF WITH CERAMIC
or HI.
2. For fan-only operation, without any heat output, turn
CONTROL
the Selector Control to the FAN setting.
This heater is equipped with a patented, technologically
3. The Power Light will remain lit during operation.
advanced, safety system that requires the user to reset
the heater if there is a potential overheat situation. When
SETTING THE THERMOSTAT
a potential overheat temperature is reached, the system
(FOR HFH111 AND HFH111T ONLY)
will automatically shut the heater off. It can only resume
operation when the user resets the unit. For specific reset
1. You need to set thermostat on HI to start heater (See
instructions please refer to the unit.
Figure 1). Allow heater to operate and warm up the
room.
Tip-over Shut-off (for HFH111T only):
2. When the desired temperature/comfort level is
When the unit is accidentally knocked over, it will shut
reached, lower the thermostat setting until the
off. To reset, simply place the heater in an upright
fan/heater stops operating.
position on a level surface.
3. The control will now automatically maintain the pre-
set temperature level by turning the heater ON and
To Reset the Heater (for HFH110 and WF110
OFF.
only):
NOTE: It is normal for the heater to cycle ON and OFF as
1. Turn MODE to OFF.
it maintains the preset temperature. To prevent the unit
2. Unplug unit, wait 30 minutes.
from cycling, you need to raise the thermostat setting.
3. Plug in again and turn ON.
To Reset the Heater (for HFH111 and HFH111T
only):
If the unit shuts down:
1. Turn MODE to OFF and THERMOSTAT to HI.
2. Unplug unit, wait 30 minutes.
3. Plug in and turn ON.
C L E A N I N G / M A I N T E N A N C E
T R O U B L E S H O O T I N G / I L L U S T R AT I O N S
CLEANING/MAINTENANCE
ILLUSTRATIONS
• Always unplug the heater before cleaning.
• Lightly run a vacuum cleaner nozzle over the heater
Figure 1
grill to remove any dust or dirt that may have
accumulated.
for HFH110 & WF110
• Carefully wipe the heater with a soft, damp cloth.
Please be very cautious near the motor and heating
A. Carry Handle (not
elements.
shown)
• NEVER use abrasive or flammable solvents to clean
B. Selector Control
the heater.
C. Power Light
• After cleaning, be sure to completely dry the heater
with a cloth or towel.
• Store your heater in its original carton in a cool, dry
location.
TROUBLESHOOTING
If your heater fails to operate, unplug
Figure 2
the heater and:
• Make sure the electrical outlet and circuit breaker
for HFH111 & HFH111T
are working.
• Check for obstructions. If you find an obstruction,
turn OFF and UNPLUG the heater. Carefully remove
A. Power Light
the obstruction and follow the reset instructions.
B. Mode Control
• Check the thermostat setting; it might be set too low.
C. Thermostat Control
Turn the thermostat dial clockwise until the heater
D. Carry Handle (not
restarts.
shown)
• Make sure the Mode Control is in Lo or Hi setting.
Please DO NOT attempt to open or repair the heater.
Please see the Warranty for Service Instructions.
A
B
C
C
D
B
A
Advertisement
