Table of Contents
Advertisement
2. Remove the Corner metal. (See section 8.2.29.)
3. Remove the screws (×18
4. Remove the Cabinet assy from the Plasma panel.
5. Remove the Spacer A (×6
6. Remove the Spacer B (×6
).
) from the Plasma panel.
) from the Cabinet assy.
8.2.31. Replace the plasma panel
Caution:
Place the Plasma panel on a flat surface of a table (cov-
ered by a soft cloth) and a cushion.
A new plasma panel itself without Cabinet assy is fragile.
To avoid the damage to new plasma panel, carry a new
plasma panel taking hold of the Cabinet assy.
1. Place a carton box packed a new plasma panel on the flat
surface of the work bench.
2. Open a box and without taking a new plasma panel.
3. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
*When fitting the cabinet assy, be careful not to allow any
debris, dust or handling residue to remain between the
cabinet assy and plasma panel.
38
Advertisement
Table of Contents
