Table of Contents
Advertisement
8.1.10. Remove the A-Board
1. Remove the Rear panel. (See section 8.1.2.)
2. Remove the DH-Board and DH-Board shield metal. (See
section 8.1.9.)
3. Unlock the cable clampers to free the cable.
4. Disconnect the flexible cables (A5 and A11).
5. Disconnect the connectors (A9, A12, A71, A72 and A81).
6. Disconnect the bridge connectors (A10-P9, A51-G51 and
A52-G52).
7. Remove the screws (×4
) and remove the A-Board.
29
Advertisement
Table of Contents
