Toshiba JOKC1 Instruction Manual page 6

Safety Precautions
3. Safety Precautions for Daily Use
WARNING
Check specifications:
Before using the equipment, make sure that the capacity, voltage and regulation of the
power supply meet the specifications of the equipment. In case they don not, the
equipment may not only work adequately but may suffer a breakdown or overheat that may
result in fire.
Turn off power in the event of a problem:
If the temperature in or around the equipment rises abnormally high or an unusual fault
occurs to the equipment, stop using the equipment and turn off its power and then contact
your Toshiba representative. If the equipment is left alone, overheat may result in fire.
CAUTION
Remove static electricity first:
When installing/removing the JOKC1 card onto/from the OIS PC, make sure to remove the
static electricity first. Unremoved static electricity may cause equipment failure or data
damage.
Do not touch components:
Do not touch the JOKC1 card parts, pins, connectors or soldered surfaces with any part of
your body. Static electricity may damage IC's or LSI's, and cause equipment to fail. This
may also result in damaging the pointed end of the component lead.
Do not disassemble the equipment:
Do not disassemble or modify the JOKC1 card or the keyboard UOPK8UE. Doing so may
not only lessen equipment safety but also may result in equipment malfunction or failure.
Handle cords and cables properly:
Do not force to pull, twist or bend cords and cables of power supply. Otherwise cables may
break or become overheated.
Keep off metals:
Do not insert metals or drop clips, etc. into any openings in the main unit of the equipment.
Doing so may cause fire.
Remove the power cord before work:
Before starting the work, turn off the power switch and the AC input switch and then remove
the power cord plug. Negligence to do so may cause electric shock or failure.
iv