Channel Manager
Select CHANNEL MANAGER to set your Antenna options, run
Auto Channel Scan, Check Signal Meter and Set Channel List.
1.
Press CURSOR PAD
,
2.
Press the SELECT button or CURSOR PAD
Video
Audio
Channel Manager
Locks
+
Timers
Setup
Move
Channel Manager
Signal Meter
Auto Channel Scan
OR
Channel List
Move
Select
SEL
Signal Meter
Select SIGNAL METER when using an indoor or outdoor antenna.
This feature will show the signal strength and peak values of the
Antenna signal to help you adjust your antenna to optimize signal
reception.
Channel Manager
Signal Meter
Channel
3-1
Strength
91
Peak
91
SNR
10
Close
Move
Return
SEL
Use the CURSOR PADS buttons
highlight and select CLOSE to exit.
The Signal Meter will not be available (grayed out)
NOTE
when watching analog channels.
Auto Channel Scan
This feature will automatically store active Analog and Digital
channels in Auto Channel Scan memory.
Channel Manager
Auto Channel Scan
Source
Air
Auto Channel Scan
Move
Return
SEL
1.
Use the CURSOR buttons
or CABLE(2) source.
to highlight functions.
to select.
Select
SEL
,
and the SELECT button to
Reset
Start
or
to highlight AIR, CABLE (1)
2.
Press the CURSOR buttons
RESET option.
3.
Press the SELECT button to select.
If certain channels are poor or not possible in cable(1)
NOTE
mode, set cable source to cable(2) by using the
CURSOR buttons
Channel List
This function allows you to review which channels are labeled (ID),
which have been added to CHANNEL MEMORY (SKIP), which
are protected by LOCK and which are your FAVORITE (FAV)
CHANNELS.
Channel Manager
Channel List
FAV
CH#
Skip
3-1
On
4
On
5
On
6
On
7
On
8
On
9
On
10
On
No Info
--:-- AM
Move
Return
1.
Use the CURSOR PAD to navigate the Channel List.
2.
Press the SELECT button to select ON or OFF on the SKIP
and LOCK columns.
3.
To select LOCK column, input the access code.(Default access
code: 0000)
4.
Press the FAV button to set or remove the FAVORITE
settings.
5.
Press the EXIT button to return to normal viewing.
The Channel List cannot be updated by only
NOTE
changing the cable source. Auto Channel Scan must
be performed for the Channel List to be updated.
IMPORTANT NOTICE
United States federal law requires broadcasters to stop transmitting
analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV's analog tuner will not be capable of receiving
over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV's analog tuner will continue to
work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV's digital tuner will
receive available over-the-air digital television broadcasts using an
antenna and other digital television broadcasts using compatible
cable, satellite or other digital television system connections.
Please review this Operating Guide for further information
regarding such connections.
Hitachi supports the DTV transition and as a member of the DTV
Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
•
www.dtvtransition.org
•
www.myceknowhow.com
or
to highlight the START or
or .
Lock
ID
Off
------
Off
------
Off
------
Off
------
Off
------
Off
------
Off
------
Off
------
--:-- AM
DETAIL
INFO
•
www.dtv2009.gov
•
www.youtube.com
33