Hitachi P42A202 Operating Manual page 30

Video
Select VIDEO to adjust picture settings and improve picture
quality. You can independently customize each of the video inputs
to your preference to increase viewing performance and pleasure
depending upon the video program being viewed. If RESET is
selected, only the selected input will reset to initial conditions.
Video
Picture Mode
Contrast
Brightness
Color
Tint
OR
Sharpness
Color Temperature
Light Sensor
Black Enhancement
Move
SEL
Picture Mode
Use this function to choose from automatic picture settings to
optimize your TV's performance.
1. Use the CURSOR buttons
PICTURE MODE settings (Dynamic, Day or Night).
2. Then press the SELECT button to set the mode and return to
the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available : Dynamic, Day and Night
mode. Dynamic is the factory preset mode for RETAIL Energy
Saving Mode and Day is the factory preset when HOME Energy
Saving Mode is used (refer to page 41). This can be changed
by adjusting any video setting to your desire conditions. Day
can be used as a second video setting for daytime viewing.
Night is set to optimize programing during nigthtime.
Other Video Menu Settings Adjustment
Use the CURSOR PAD
adjusted.
1. Press the SELECT button or the CURSOR PAD
function settings.
2. Press the CURSOR PAD
3. Press MENU to return to main menu.
4. Press EXIT to quit menu.
Contrast
Use this function to change the contrast betwen black and white
levels in the picture.
Brightness
Use this function to change the overall brightness in the picture.
30
Video
Audio
Channel Manager
Locks
Timers
Setup
Move Select
SEL
Dynamic
100%
50%
50%
0
50%
High
Off
High
Select
or to highlight and select
or to highlight the function to be
or to adjust the function.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Use this function to adjust the amount of fine detail in the picture.
Color Temperature
Set this to High for cooler color with more blue, set to Medium for
more natural color or set to Standard for accurate color.
Light Sensor
When on, the light sensor will automatically adjust the contrast
setting according to brightness of the room. Select off to manually
adjust the contrast setting.
Air
NOTE
Black Enhancement
Use this function to enhance the shadow detail in dark scenes
using the settings off, low, middle and high.
NOTES
Contrast Mode
to select the
Use this function to choose between two Contrast Mode settings.
Set to DYNAMIC for more contrast and set to NORMAL for a more
cinematic film like image.
Noise Reduction
The NOISE
conspicuous noise in the picture without degrading picture quality.
Set NOISE REDUCTION to OFF if you see individual blocks in the
picture.
MPEG NR
The MPEG NR (Noise Reduction) function automatically reduces
mosquito noise in the picture without degrading picture quality. Set
MPEG NR to OFF if the TV experiences picture block noise.
When the Light sensor function is set to ON, Contrast
Mode (see below) will be disabled (grayed out).
• If CONTRAST is selected, you are adjusting
CONTRAST. The additional
BRIGHTNESS, COLOR, TINT, and SHARPNESS
can be selected and adjusted in the same
manner.
• It may be necessary to adjust TINT to obtain
optimum picture quality
COMPONENT VIDEO Y-P
• CABLE and AIR share a Video setting. Also, each
of the video inputs have their own independent
settings.
Video
Black Enhancement High
Contrast Mode Dynamic
Noise Reduction Off
MPEG-NR Off
Auto Movie Mode Off
Color Space Vibrant
Lip Sync 0
Black Side Panel Off
Aspect
Move Select
SEL
REDUCTION function
menu items
when using the
P input jacks.
B R
Air
automatically reduces