Automatic Rewind; Identification And Operation Of Controls - Hitachi VM-1800A Instruction Manual

AUTOMATIC REWIND

12. Always remove the power source from the camcorder after use.
NOTE: If you have a cassette tape that has already been partially recorded on and you
want to record the remaining blank section, see "QUICK EDIT" on page 27.
AUTOMATIC REWIND
When the tape reaches its end during playback, it automatically rewinds to the
beginning and stops.

IDENTIFICATION AND OPERATION OF CONTROLS

Diagram of camera
Diopter Control (for VM-2800A/3800A)
Use this control to focus the viewfinder.
See page 19 for VM-1800A's diopter control
Camera Light (for VM-2800A/3800A)
When the "POWER" switch is in the "CAM" position, the camera light is turned on and
19