Black & Decker BDCDC18 Manual page 5

Additional safety instructions for batteries and
Additional safety instructions for batteries and
Additional safety instructions for batteries and
chargers (Not provided with the tool)
Additional safety instructions for batteries and
chargers (Not provided with the tool)
chargers (Not provided with the tool)
Additional safety instructions for batteries and
chargers (Not provided with the tool)
chargers (Not provided with the tool)
Batteries
Batteries
Batteries
Never attempt to open for any reason.
Batteries
Never attempt to open for any reason.
Never attempt to open for any reason.
u
Batteries u
u
Do not expose the battery to water.
Do not expose the battery to water. Never attempt to open for any reason.
Do not expose the battery to water.
u
u
u Never attempt to open for any reason.
u
‹
Do not store in locations where the temperature may
Do not store in locations where the temperature may Do not expose the battery to water.
Do not store in locations where the temperature may
u
Do not expose the battery to water.
u u
u
‹
exceed 40 °C.
exceed 40 °C. Do not store in locations where the temperature may
exceed 40 °C.
Do not store in locations where the temperature may
u
‹
Charge only at ambient temperatures between 10 °C and
Charge only at ambient temperatures between 10 °C and exceed 40 °C.
Charge only at ambient temperatures between 10 °C and
exceed 40 °C.
u
u
u
40 °C.
Charge only at ambient temperatures between 10 °C and
40 °C.
40 °C.
Charge only at ambient temperatures between 10 °C and
u
‹
Charge only using the charger provided with the tool.
40 °C.
Charge only using the charger provided with the tool.
Charge only using the charger provided with the tool.
40 °C.
u
u
u
When disposing of batteries, follow the instructions given
Charge only using the charger provided with the tool.
When disposing of batteries, follow the instructions given
When disposing of batteries, follow the instructions given
Charge only using the charger provided with the tool.
u p
u u
‹ p
u
p
in the section "Protecting the environment".
When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
When disposing of batteries, follow the instructions given in the section "Protecting the environment".
‹ u
p
in the section "Protecting the environment".
in the section "Protecting the environment".
Do not attempt to charge damaged batteries.
Do not attempt to charge damaged batteries.
Do not attempt to charge damaged batteries.
Do not attempt to charge damaged batteries.
Do not attempt to charge damaged batteries.
Chargers
Chargers
Chargers
Chargers
Use your BLACK+DECKER charger only to charge the
Chargers
Use your BLACK+DECKER charger only to charge the
Use your BLACK+DECKER charger only to charge the
u
u
u Use your BLACK+DECKER charger only to charge
‹
battery in the tool with which it was supplied. Other batter-
battery in the tool with which it was supplied. Other batter- Use your BLACK+DECKER charger only to charge the
battery in the tool with which it was supplied. Other batter-
u
the battery in the tool with which it was supplied. Other
ies could burst, causing personal injury and damage.
ies could burst, causing personal injury and damage. battery in the tool with which it was supplied. Other batter-
ies could burst, causing personal injury and damage.
batteries could burst, causing personal injury and damage.
Never attempt to charge non-rechargeable batteries.
Never attempt to charge non-rechargeable batteries. ies could burst, causing personal injury and damage.
Never attempt to charge non-rechargeable batteries.
u
u
Never attempt to charge non-rechargeable batteries.
u
‹
Have defective cords replaced immediately.
Have defective cords replaced immediately. Never attempt to charge non-rechargeable batteries.
Have defective cords replaced immediately.
u
u u Have defective cords replaced immediately.
u
‹
Do not expose the charger to water.
Have defective cords replaced immediately.
Do not expose the charger to water.
Do not expose the charger to water.
u
Do not expose the charger to water.
u u
u
‹
Do not open the charger.
Do not expose the charger to water.
Do not open the charger.
Do not open the charger.
Do not open the charger.
u
u u
‹ u
$
$
$
Do not probe the charger.
Do not open the charger.
Do not probe the charger.
Do not probe the charger.
Do not probe the charger.
u
u u
‹
u
$
Do not probe the charger.
u
+
+ The charger is intended for indoor use only.
The charger is intended for indoor use only.
+
The charger is intended for indoor use only. The charger is intended for indoor use only.
+
The charger is intended for indoor use only.
Read the instruction manual before use.
Read the instruction manual before use.
Read the instruction manual before use.
Read the instruction manual before use.
Read the instruction manual before use.
#
#
#
Electrical safety
Electrical safety
Electrical safety
Electrical safety
#
Your charger is double insulated; therefore no
Your charger is double insulated; therefore no
Electrical safety Your charger is double insulated; therefore no
Your charger is double insulated; therefore no
earth wire is required. Always check that the
earth wire is required. Always check that the Your charger is double insulated; therefore no
earth wire is required. Always check that the
earth wire is required. Always check that the
mains voltage corresponds to the voltage on
earth wire is required. Always check that the mains voltage corresponds to the voltage on the
mains voltage corresponds to the voltage on
mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the rating plate. Never attempt to replace the charger
mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the
the rating plate. Never attempt to replace the
unit with a regular mains plug.
charger unit with a regular mains plug.
the rating plate. Never attempt to replace the
charger unit with a regular mains plug.
charger unit with a regular mains plug.
charger unit with a regular mains plug.
If the supply cord is damaged, it must be replaced by the
If the supply cord is damaged, it must be replaced by the
If the supply cord is damaged, it must be replaced by the
‹
If the supply cord is damaged, it must be replaced by the
u
u
u
manufacturer or an authorized BLACK+DECKER Service
manufacturer or an authorised BLACK+DECKER Service
manufacturer or an authorised BLACK+DECKER Service If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
u
Centre in order to avoid a hazard.
Centre in order to avoid a hazard.
Centre in order to avoid a hazard. manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Centre in order to avoid a hazard.
Features
Features
Features
Features
Features
This tool includes some or all of the following features.
This tool includes some or all of the following features.
This tool includes some or all of the following features.
This tool includes some or all of the following features.
1. Variable speed switch
1. Variable speed switch
This tool includes some or all of the following features.
1. Variable speed switch
1. Variable speed switch
2. Forward/reverse slider
2. Forward/reverse slider
1. Variable speed switch
2. Forward/reverse slider
2. Forward/reverse slider
3. Torque adjustment collar
3. Torque adjustment collar
3. Torque adjustment collar 2. Forward/reverse slider
3. Torque adjustment collar
4. Keyless chuck
4. Keyless chuck
4. Keyless chuck 3. Torque adjustment collar
4. Keyless chuck
5. LED work light
5. LED work light
5. LED work light 4. Keyless chuck
5. LED work light
6. Battery
6. Battery
6. Battery 5. LED work light
6. Battery
7. Battery release button
7. Battery release button
7. Battery release button 6. Battery
7. Battery release button
7. Battery release button
(Original instructions)
(Original instructions)
(Original instructions)
(Original instructions)
Assembly
Assembly
Assembly
Assembly
Assembly
Use
Use
Use
Use
Warning! Let the tool work at its own pace. Do not overload.
Warning! Let the tool work at its own pace. Do not overload.
Warning! Let the tool work at its own pace. Do not overload.
Use
Warning! Let the tool work at its own pace. Do not overload.
Warning! Let the tool work at its own pace. Do not overload.
Charging the battery (fig. A)
done before. The battery may become warm while charging;
done before. The battery may become warm while charging; The battery needs to be charged before first use and when-
done before. The battery may become warm while charging;
this is normal and does not indicate a problem.
ever it fails to produce sufficient power on jobs that were
this is normal and does not indicate a problem. done before. The battery may become warm while charging;
this is normal and does not indicate a problem.
Warning! Do not charge the battery at ambient temperatures easily done before. The battery may become warm while
Warning! Do not charge the battery at ambient temperatures this is normal and does not indicate a problem.
Warning! Do not charge the battery at ambient temperatures
charging; this is normal and does not indicate a problem.
below 10 °C or above 40 °C. Recommended charging tem-
below 10 °C or above 40 °C. Recommended charging tem- Warning! Do not charge the battery at ambient temperatures
below 10 °C or above 40 °C. Recommended charging tem-
Warning! Do not charge the battery at ambient tempera-
perature: approx. 24 °C.
perature: approx. 24 °C. below 10 °C or above 40 °C. Recommended charging tem-
perature: approx. 24 °C.
tures below 10 °C or above 40 °C. Recommended charging
Note: The charger will not charge a battery if the cell
Note: The charger will not charge a battery if the cell perature: approx. 24 °C.
Note: The charger will not charge a battery if the cell
temperature: approx. 24 °C.
temperature is below approximately 10 °C or above 40 °C.
temperature is below approximately 10 °C or above 40 °C. Note: The charger will not charge a battery if the cell
temperature is below approximately 10 °C or above 40 °C.
Note: The charger will not charge a battery if the cell
The battery should be left in the charger and the charger
The battery should be left in the charger and the charger temperature is below approximately 10 °C or above 40 °C.
The battery should be left in the charger and the charger
temperature is below approximately 10 °C or above 40 °C.
will begin to charge automatically when the cell tempera-
will begin to charge automatically when the cell tempera- The battery should be left in the charger and the charger
will begin to charge automatically when the cell tempera-
The battery should be left in the charger and the charger
ture warms up or cools down.
ture warms up or cools down. will begin to charge automatically when the cell tempera-
ture warms up or cools down.
will begin to charge automatically when the cell tempera-
Plug the charger into any standard 230 Volts 50 Hz electri-
ture warms up or cools down.
Plug the charger into any standard 230 Volts 50 Hz electri-
Plug the charger into any standard 230 Volts 50 Hz electri-
u
u
ture warms up or cools down.
u
cal outlet.
cal outlet. Plug the charger into any standard 230 Volts 50 Hz electri-
cal outlet.
u
Plug the charger into any standard 230 Volts 50 Hz elec-
‹
cal outlet.
u
u
trical outlet.
u
A.
A.
A.
u Slide the battery pack into the charger as shown in figure
‹
A.
u
A.
u
u
ing charged.
ing charged.
ing charged.
The green LED will flash indicating that the battery is
u
‹
The completion of charge is indicated by the green LED
ing charged.
The completion of charge is indicated by the green LED
The completion of charge is indicated by the green LED
u being charged.
u
u
remaining on continuously. The pack is fully charged and
The completion of charge is indicated by the green LED
remaining on continuously. The pack is fully charged and
remaining on continuously. The pack is fully charged and
The completion of charge is indicated by the green LED
u
‹
may be used at this time or left on the charger.
remaining on continuously. The pack is fully charged and
may be used at this time or left on the charger.
may be used at this time or left on the charger.
remaining on continuously. The pack is fully charged and
Warning!
Warning! may be used at this time or left on the charger.
Warning!
may be used at this time or left on the charger.
Warning!
Warning! fire Hazard. When disconnecting the charger from
then disconnect the charger cord from the tool.
then disconnect the charger cord from the tool.
the tool, be sure to unplug the charger from the outlet first,
then disconnect the charger cord from the tool.
then disconnect the charger cord from the tool.
then disconnect the charger cord from the tool.
Installing and removing the battery pack from the
Installing and removing the battery pack from the
Installing and removing the battery pack from the
Installing and removing the battery pack from
Installing and removing the battery pack from the
the tool (fig. B)
Warning! Make certain the lock-off button is engaged to
Warning! Make certain the lock-off button is engaged to
Warning! Make certain the lock-off button is engaged to
Warning! Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
Warning! Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
prevent switch actuation before removing or installing battery.
prevent switch actuation before removing or installing battery.
To install battery pack:
To install battery pack: prevent switch actuation before removing or installing battery.
To install battery pack:
To install battery pack:
Insert battery pack into tool, until an audible click is heard
To install battery pack: Insert battery pack into tool, until an audible click is heard
Insert battery pack into tool, until an audible click is heard
u
u
u Insert battery pack into tool, until an audible click is heard
‹
Insert battery pack into tool, until an audible click is heard
u
(fig. B)
Removing the battery pack from the tool (fig. C)
u
u
u
Depress the battery release button as shown in (fig. C)
‹ and pull battery pack out of tool.
and pull battery pack out of tool.
and pull battery pack out of tool.
u
and pull battery pack out of tool.
and pull battery pack out of tool.
Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
Torque control (fig. D)
This tool is fitted with a torque adjustment collar (3) to select
the operating mode and to set the torque for tightening
the operating mode and to set the torque for tightening
the operating mode and to set the torque for tightening
the operating mode and to set the torque for tightening
screws. Large screws and hard workpiece materials require
the operating mode and to set the torque for tightening
screws. Large screws and hard workpiece materials require
screws. Large screws and hard workpiece materials require
screws. Large screws and hard workpiece materials require
a higher torque setting than small screws and soft workpiece
screws. Large screws and hard workpiece materials require
a higher torque setting than small screws and soft workpiece
a higher torque setting than small screws and soft workpiece
a higher torque setting than small screws and soft workpiece
materials.
a higher torque setting than small screws and soft workpiece
materials.
materials.
materials.
materials.
ENGLISH
ENGLISH
ENGLISH
ENGLISH
ENGLISH
-
-
-
-
-
-
-
-
5
5
5
5
5