Changing The Font Size; Location Settings - Sanyo Sprint SCP-7200 User Manual

Changing the Font Size

There are four font size settings for the message notification and
browser. To change the font size, follow these steps:
1. Press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Font Size and press
5. Highlight either Notifications or Browser and press
6. Select your desired font size.
Press Preview (right softkey) to display a font size example.
7. Press
Tip:
From the font example display, you can see the larger/smaller font displays
by pressing / on the Navigation key.

Location Settings

Your PCS Phone is equipped with a Location feature for use in
connection with location-based services that may be available
in the future.
The Location feature allows the network to detect your position.
Turning Location off will hide your location from everyone
except 911.
Note:
Even if the Location feature is enabled, no service may use your location
without your expressed permission.
To enable your phone's Location feature:
1. Press
2. Highlight Settings and press
3. Highlight Location and press
4. Press
message scrolls down completely.
5. Select On and press
To deactivate this feature, select Off during step 5 above.
When the Location feature is on, your phone's standby screen will
display the
display.
Section 2: Understanding Your PCS Phone
2B: Controlling Your Phone's Settings
to access the main menu.
to set the selected font.
to access the main menu.
or OK (left softkey) or wait a few seconds until the
icon. When Location is turned off, the
.
.
.
.
.
.
.
icon will
48