Display Settings; Changing The Phone's Main Menu Style; Changing The Screen Saver; Changing The Brightness - Sanyo SCP-3810 Operating Manual

Display Settings

Changing the Phone's Main Menu Style

You can choose how the menu is displayed on the screen.
► Press MENU/OK and select LIST VIEW (left softkey) or GRID VIEW (left softkey).

Changing the Screen Saver

Your can set a screen saver to display while in standby mode.
Press MENU/OK > Settings > Display > Screensaver.
1.
Select a category and select a screen saver.
2.

Changing the Brightness

You can adjust the brightness on the main screen. When the Power Save Mode is on, and
when the Backlight Dim setting is Always Dim, you can not change this setting.
1. Press MENU/OK > Settings > Display > Brightness.
2. Highlight an option and press MENU/OK.

Changing the Backlight Time Length

Select how long the display screen and keypad remain backlit after any keypress is made.
To change the Backlight setting:
1. Press MENU/OK > Settings > Display > Backlight.
2. Select Backlight Dim or Backlight Off.
If you select Backlight Dim, select Always Bright, Always Dim or a preset time
length. If you select Always Bright, press DONE (left softkey) to confirm the
setting.
If you select Backlight Off, select Off After 15 Seconds, Off After 30 Seconds
or Off After 1 Minute.
Note: Long backlight settings affect the battery's talk and standby times.

Changing the Picture ID

Your can select an image to a contact entry as a Picture ID.
Press MENU/OK > Settings > Display > Picture ID.
1.
Select an option and press MENU/OK.
2.
3. Select Contacts, Unsaved Numbers, or Private / Unknown.
4. Select All Contacts or One Contact.
5. Follow the onscreen instructions.

Changing the Font Size

You can adjust the viewing and input sizes of the letters appear on main screen in a lot of
scenes, such as the menu listing, letter and phone number entering, etc,
1. Press MENU/OK > Settings > Others > Accessibility > Font Size.
- or -
From standby mode, press OPTIONS (left softkey).
2. Select Large or Normal, and press MENU/OK.
21