Harbor Freight Tools 95082 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Planer
  5. 95082
  6. Set up and operating instructions manual

Harbor Freight Tools 95082 Set Up And Operating Instructions Manual

Harbor freight tools planer user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

2-1/2 HP / 12" PLANER
SEt uP ANd OPERAtiNg iNStRuctiONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE tHiS mANuAL.
©
Copyright
2010 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised 11h
95082
®
. All rights reserved. No portion of this manual or any artwork

Advertisement

Table of Contents
loading

Related Manuals for Harbor Freight Tools 95082

Summary of Contents for Harbor Freight Tools 95082

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

  • Page 2: Important Safety Information

    WARNiNg indicates a hazardous situation which, if not avoided, could result in death or serious injury. SKU 95082 For technical questions, please call 1-800-444-3353. cAutiON, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
  • Page 3 A SKU 95082 For technical questions, please call 1-800-444-3353. moment of inattention while operating power tools may result in serious personal injury.

  • Page 4: Specific Safety Warnings

    Planer. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools. Dust mask, non skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
  • Page 5 These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. this product is not a toy. out of reach of children. People with pacemakers should consult their physician(s) before use.
  • Page 6 Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool SKU 95082 For technical questions, please call 1-800-444-3353. should electrically malfunction or break down, grounding provides a...

  • Page 7: Extension Cords

    “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. SKU 95082 For technical questions, please call 1-800-444-3353. Make sure the extension cord is properly wired and in good electrical condition.

  • Page 8: Specifications

    Assembly Diagram near the end of this manual. Rev 10d SKU 95082 For technical questions, please call 1-800-444-3353. Assembly NOtE: This should always be mounted to a workbench before use.

  • Page 9: Work Piece And Work Area Set Up

    Figure c A dust collection bag can be attached to the dust Chute to collect wood chips, however it is critical to ensure SKU 95082 For technical questions, please call 1-800-444-3353. dust bag is emptied frequently to prevent clogging. WARNiNg: ENSuRE duSt BAg iS EmPtiEd FREQuENtLY.
  • Page 10 (157) allow access by children or pets to prevent injury and distraction. Route the power cord extension along a safe path to reach the Planer without creating a tripping hazard or exposing the power cord to possible damage. There must not be hazardous...
  • Page 11 • wider than 12” • shorter than 15” 10. The planer has a maximum depth cut of 3/32” per pass. The Planer will operate best when the depth of cut is less than 1/16”. It is recommended to make a series of shallow cuts rather than a single deep cut.

  • Page 12: Maintenance And Servicing

    PERiOdicALLY, blow the interior of the Planer out with compressed air and lubricate moving parts with white lithium grease. SKU 95082 For technical questions, please call 1-800-444-3353. cARBON BRuSH mAiNtENANcE. The carbon brushes may require maintenance when motor performance of tool decreases or stops working completely.
  • Page 13 Figure E. Place the Screws in a safe location. Using the two tool Magnets (123), lift the Gib off and set aside. SKU 95082 For technical questions, please call 1-800-444-3353. Using the two Magnets (123), lift the Blade (57) off the Cutterhead (53).

  • Page 14: Adjust Roller Case Level

    CeRTiFied And liCenSed TeCHniCiAnS, And nOT By THe BuyeR. THe BuyeR ASSuMeS All RiSk And liABiliTy ARiSing OuT OF HiS OR HeR RePAiRS TO THe ORiginAl PROduCT OR RePlACeMenT PARTS THeReTO, OR ARiSing OuT OF HiS OR HeR inSTAllATiOn OF RePlACeMenT PARTS THeReTO. SKU 95082 For technical questions, please call 1-800-444-3353. REPLAciNg tHE V-BELt.

  • Page 15: Troubleshooting

    Wrong circuit breaker or fuse. Dull blades. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. SKU 95082 For technical questions, please call 1-800-444-3353. troubleshooting Likely Solutions Check power at outlet.

  • Page 16: Parts List

    M5x0.8x8mm Pan Head Screw Serrated Washer M5 Spacer M5x0.8x8mm Set Screw M5x0.8x10mm Pan Head Screw Cable Clamp Roller Case M5x0.8x10mm Socket Head Bolt SKU 95082 For technical questions, please call 1-800-444-3353. PARtS LiSt Q’ty Part description Belt Guard M5x0.8x12mm Socket Head Bolt Flat Washer M8 M8x1.25x20mm Hex Head Bolt...
  • Page 17 Lock Washer M4 Motor Assembly (includes key nos 1-29) NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 95082 For technical questions, please call 1-800-444-3353. Q’ty Part description M5x0.8x20mm Pan Head Screw...

  • Page 18: Assembly Diagram

    ASSEmBLY diAgRAm SKU 95082 For technical questions, please call 1-800-444-3353. Page 18...
  • Page 19 ASSEmBLY diAgRAm (cONtiNuEd) SKU 95082 For technical questions, please call 1-800-444-3353. Page 19...
  • Page 20 ASSEmBLY diAgRAm (cONtiNuEd) SKU 95082 For technical questions, please call 1-800-444-3353. Page 20...
  • Page 21 90 dAY WARRANtY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents