Table of Contents
Advertisement
3-1. Web Menu Overview
Operations such as confirming the settings of the unit and upgrading the firmware are enabled through the NETWORK connector.
The Web menu consists of the following menus.
Status group
•
Software Version page
•
Internal Storage page
Maintenance group
•
Network page
•
SNMP page
•
Account page
•
Setup Menu page
•
Software Update page
•
Log page
•
Warning page
3-1-1. Making a Connection to the Web Menu
Tools/Equipment Required
•
Personal computer (referred to as PC hereafter)
•
Network cable (crossover or straight-through)
Procedure
1.
Connect the unit to the host PC using one of the following ways.
•
Connect the unit to the host PC through a network device (such as a hub).
•
Connect the unit directly to the host PC.
2.
Start the web browser of the PC. Enter "http://192.168.1.10" in the Address bar. (The underlined part is the IP address of the
unit.)
Note
Use Internet Explorer for the web browser of the PC.
Other web browsers may not function correctly.
3.
Enter "admin" for User name and password, and then click [OK].
Tip
User name and User password can be changed on the Account page.
The Web menu top page appears.
4.
Click a menu you want to browse on the left frame.
Section 3
Web Menu
34
Advertisement
Table of Contents
