Minolta SR-T 101 Owner's Manual page 19

Hide thumbs Also See for SR-T 101:
Table of Contents

Advertisement

When the proper combination of aperture and
shutter
speed setting
exposure, the follower
ed to the aperture,
speed settings) will
needle over a range of EV 3 through EV 17 at
ASA 100. The EV range will
speed.
It is a recommended procedure to set the
shutter speed first (depending on the motion or
lack of motion
of your subject or the overall
lighting) and to then adjust the aperture.
If
the
needle
fails
diaphragm ring is rotated
adjust your shutter speed setting.
A
shutter
speed scale is visible
viewfinder
which
permits
exposure
adjustments
camera from your eye.
All manuals and user guides at all-guides.com
is made for
correct
needle (which is coupl-
shutter
speed and ASA
align with
the indicator
vary with film
to
move
when
this signals a need to
in
you
to
make all
without
removing the
CAUTION:
• When setting the aperture first, be sure not to
set the shutter speed between click stops.
• When the shutter
1/3Oth sec.. be extremely
motion
while
recommended that a tripod be used at speeds
of 1/3Oth sec. or slower. For "Bulb"
cable release should also be used.
• When using high-speed film, a shutter speed of
1/250th
sec. is recommended
photography, and 1/30th sec. for indoor use.
the
• When photographing
building requiring great depth of field, close
down the diaphragm as much as possible. See
the
the "depth of field" on page 25 for details.
• All
metering should be done in horizontal
position.
speed is set slower than
careful of camera
releasing the
shutter.
setting, a
for outdoor
a group of people or a
It
is

Advertisement

Table of Contents
loading

Table of Contents