Table of Contents
Advertisement
Test Operation
MEMORY SETTING
This Electric Water Heater allows user
to store up to 2 desired settings (M1/
M2) for easy access.
Memory Function
After selecting the desired temperature,
press the memory button (either
M1,M2) and hold for 3 seconds to
store.
Memory indicator will lights up and
beeps once to indicate the setting has
been stored.
Memory selection
User may select a desired stored
setting by pressing either M1,M2.
Deactivate the memory function
Press any button except your current
selected memory (M1,M2) to exit your
selected memory.
The memory indicator will appear in the
event that the combination manual
selection for the temperature value are
the same as stored memory, the
memory indicator will lights up.
Advertisement
Table of Contents
