Installation - Sharp LC-19LE330H Operation Manual

PC Compatibility Chart
RESOLUTION
1 640x480
2
800x600
3 1024x768
4
1280x1024
1360x768
5
1920x1080
6
(Applied only on 24/32")
HDMI Compatible Signal Format
480i, 480p, 576i, 576p, 720p/50Hz, 720p/60Hz,
1080i/50Hz, 1080i/60Hz, 1080p/24Hz, 1080p/50Hz, 1080p/60Hz.
Stand Installation
LC-19LE330H
1.Confirm the stand unit came with 3 screws.
2.Insert the stand into the slot at the bottom of
the TV.
Insert and tighten the 3 screws into the 3 holes
at the bottom of the stand.
NOTE:
- To detach the stand, perform the steps in reverse order.
- Angle adjustment is not available with the LC-19LE330H/LC-24LE330H/LC-32LE330H.
- Screwdriver is not supplied with this product.
screws (x3)
(used in step 2)
Screwdriver
Screws
V.Freq.(Hz)
60
60
60
60
60
60
LC-24LE330H/LC-32LE330H
1.Confirm the stand unit came with 4 screws.
2.Insert the stand into the slot at the bottom of
the TV.
Insert and tighten the 4 screws into the 4 holes
at the bottom of the stand.
-7-

INSTALLATION

H.Freq.(KHz)
31.47
37.88
48.36
63.98
47.70
66.64
screws (x4)
(used in step 2)
Screwdriver
Screws