Kenwood DV-2070 Instruction Manual page 47

DV-2070 (En/K)
Changing initial
setufiM
. TV Aspect]
'-:zjmssa&
Perform steps Q to
El
of the procedure in "<Basic operation for changing the initial
setup".
Select the aspect ratio of your TV.
Each press of the joystick
(a, V}
switches the items as
follows.
p- l 1 4:3
2
2 16:9
Setting details
[1 4:3] {Factory setup)
Select this item when the player is connected to a TV with
standard aspect ratio.
• Wide-screen software with pan & scan specification is played in a
panned & scanned screen (with the left and right sides cut off).
•Wide-screen software with pan & scan specification is played in a
letterbox screen (with black stripes on the top and bottom).
[2 16:9]
Select this item when the player is connected to a wide¬
screen TV. Wide-screen software is played in a full wide¬
screen.
• Set the picture mode of the wide-screen TV to "FULL".
To return to the previous menu screen
Press the RETURN key.
To exit initial setup
Select "0 Exit" in the initial setup screen.