Fuses; Bulb Replacement; Headlight Adjustment - PEUGEOT KISBEE 50 2021 User Manual

FUSES

FR
Main fuse 15A.
Electrical equipment: 10A
Accessories fuse: 10A
GB
DE
IT
ES
Find the faulty fuse by looking at the condition of its
filament
NL
GR
If a fuse often blows this is usually a sign
of a short circuit in the electrical circuit.
You are advised to have the system
SE checked by a registered dealer.
Before changing a fuse, you must find the reason for the
fault and correct it.
Always replace the faulty fuse with a fuse of the same
PT
rating.
You are advised to switch off the ignition
before changing a fuse and always to
FI
replace it with a fuse of the same rating. If
you do not do so, this may lead to damage
in the electrical circuit or even a fire.
DK
20/20

BULB REPLACEMENT

Headlight bulb/Indicator bulbs
• Remove the front fairing (1).
You are advised to contact a registered
dealer to have this operation carried out.
1
Under certain climatic conditions (low
temperatures, humidity). The presence of
mist on the inside of the headlight glass
is normal. It disappears a few minutes
after the lights are switched on.
Headlight bulb
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Rear light and indicator bulbs
• Remove the 2 screws that secure the taillight lens (2).
Rear light bulb
Indicator bulbs
The headlight is adjusted using a screw which can be
accessed from the rear shield panel (A).
12V - 35/35W (HS1)
12V - 21/5W
12V - 10W

HEADLIGHT ADJUSTMENT

A
2