Instruments - PEUGEOT KISBEE 50 2021 User Manual

INSTRUMENTS

FR
Instrument panel Kisbee
1 2
GB
6
DE
IT
ES
1 - Speedometer
- Double-scale speedometer showing kilometers and
miles.
NL
2 - Milometer
3 - Direction indicator warning light
If the warning light flashes quickly, there
GR
is a fault in the direction indicators.
SE 4 - Emissions control system failure warning light
If the indicator light turns on when riding,
you are advised to have the vehicle
checked by an authorised dealer.
PT
5 - Fuel gauge
FI
6 - Main beam control
DK
10/20
Instrument panel Streetzone
3 4
5
6
1 - Speedometer
2 - Fuel gauge/Fuel reserve gauge
r
• 1st level: the two segments flash.
• 2nd level: the last segment flashes.
When the tank is empty, all the segments on the fuel
gauge are off and the "pump" symbol flashes (p).
If all the segments flash, the diagnostic function has
detected an anomaly on the fuel gauge system. The
system must be checked by an authorised dealer.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
7 1 2
3
A 5
When the fuel tank is full all the
segments of the fuel gauge are
p
lit.
The fuel reserve gauge
corresponds to the two last
segments (r) which show two
reserve levels.
3 - Min. oil level indicator
• If the oil indicator flashes or stays on, top up the oil in
the oil tank.
3
If the warning light flashes quickly, there
is a fault in the direction indicators.
4 - Emissions control system failure warning light
If the indicator light turns on when riding,
you are advised to have the vehicle
checked by an authorised dealer.
4
5 - Milometer/Tripmeter (TRIP).
- The tripmeter displays and stores the number of
kilometres travelled by the vehicle. The machine total
kilometres remains in the memory when the battery is
disconnected.
- The tripmeter displays and stores the number of
kilometers travelled during a given period.
Changing from the total distance display to the daily
distance display
- With the ignition on, switching from the total distance
display to the daily distance display and vice-versa is
done by briefly pressing the control button (A).
Resetting the tripmeter
- The daily counter is reset by pressing more than
3 seconds on the control button (A).
6 - Main beam control