Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jabra GN9010-BT
Summary of Contents for Jabra GN9010-BT
-
Page 1: User Guide
GN9020-D Digital Wireless System GN9010-BT Bluetooth™ Wireless System User Guide... -
Page 3: Charging The Battery
It takes 3 hours to fully charge the battery. When fully charged, the battery charging indicator flashes. — A fully charged GN9020-D provides 7 hours of talktime. — A fully charge GN9010-BT provides 2 hours of talktime. -
Page 4: Checking The System
Checking the System If your telephone has volume control, set the volume in the middle position. Press the headset/handset selector to switch on the headset. The headset mode indicator on the base station illuminates. The headset mode indicator on the headset begins flashing within 10 seconds. -
Page 5: Adjusting The Microphone Volume
Adjusting the Microphone Volume Put on the headset. Press the headset/handset selector to switch to handset mode. Call someone using your handset and ask the person to help you evaluate the volume of your voice. Using the headset/handset selector to toggle back and forth between handset and headset mode, adjust the microphone volume... -
Page 6: Answering And Placing Calls
Answering and Placing Calls Put on the headset. Set the headset/handset selector to headset position. Lift the handset from the phone. Answer or place the call. You can now move freely away from the base station. If you move out of transmission range, you will hear a beep in the headset every... -
Page 7: Adjusting The Receive Volume
Adjusting the Receive Volume To increase or decrease the volume, press the upper (+) or lower (-) part of the oval volume control on the headset. When the volume reaches maximum or minimum, you will hear a beep in your headset. Muting the Microphone To talk without the other party hearing you, press... -
Page 8: Comfort Adjustments
Comfort Adjustments You can wear the headset on your right or left ear, whichever side you prefer. To switch sides, simply rotate the microphone boom below the headband. NOTE: Do not force the boom over the top of the headset. Adjust the length of the headband so the headset rests com-... -
Page 9: Frequently Asked Questions
Frequently Asked Questions Why can’t I hear a dial tone? • Check that all cords are connected correctly. • Be sure the AC power adapter is plugged in and power is turned on. • Be sure the headset/handset selector is in headset position and the headset mode indicators are illuminated. -
Page 10: Cautionary Notes To Computer Users
• Increase the relative humidity in the room to 60% or more. • Install static dissipative carpets or floor coverings (anti-static sprays can be helpful). • Remove the headset before turning the computer on or off. GN Netcom, Inc. headsets meet all OSHA, UL, FCC and CS standards. -
Page 11: Safety Instructions
Safety Instructions • Never try to dismantle the product yourself. None of the internal components can be repaired by users. • Do not expose the headset to rain or other liquids. • The headset is equipped with a rechargeable NiMH battery (nickel-metal-hydride). For battery replacement, please contact your distributor or reseller. -
Page 12: Fcc Notice To Users
FCC Notice to Users Upon request only, you must notify your telephone utility company (telco) of your intention to install or permanently remove an FCC Part 68 registered device or system. Include the FCC Registration Number and the Ringer Equivalence Number (REN) located on the amplifier label. - Page 13 IC Notice to Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirement as prescribed in the appropriate Terminal Equipment Technical Resource Document(s). The department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
-
Page 14: Warranty
GN Netcom, Inc. • Any implied warranty on GN Netcom, Inc. products is limited to one year from the date of purchase on all parts, including the cords and connectors. Specifically exempt from warranty are limited-life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, ear tips, decorative finishes, batteries, and other accessories. -
Page 15: To Obtain Service
Out of warranty products will be repaired or replaced at the prevailing charge and carry a one year warranty from repair date. GN Netcom, Inc. will not assume any responsibility for any loss or damage incurred in shipping. Any repair work on GN Netcom, Inc. products by unauthorized third parties voids any existing GN Netcom, Inc. warranty. - Page 16 1555-769 77 Northeastern Blvd. • Nashua, NH 03062 USA Printed in USA 1-800-826-4656 • www.gnnetcom.com September 2000...