Electrolux DV430FHM-NN1 User Manual page 15

Spin Touchpad
Press this touchpad to select the spin
speed or no spin, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
The speed of spin level are:
– High, about 700 rpm ;
– Mid, about 650 rpm ;
– Low, about 550 rpm.
Delay End Touchpad
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
touchpad.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
2.40 hrs.
Countdown
Pressed
Start/Pause
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
: 6 hrs.
3.20 hrs.
Program Cycle
Start the End of
Program Cycle
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
- set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
-
deselect this option by pressing
"Delay End" touchpad repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
-
program.
Start/Pause Touchpad
To start the selected program, press
the "Start/Pause" touchpad.
If you have started your wash and you
wish to stop it for some reason, press
the "Start/Pause" touchpad to enter
PAUSE mode
To restart the program from the point at
which it was interrupted, press the
"Start/Pause" again.
If the lid is opened during
operation, the machine will go
into PAUSE mode and display
show " ".
After closing the lid press
Start/Pause touchpad on the
control panel to restart the
program.
ENGLISH 15
";