Advertisement
4. Connect the White, Black, Red, Green, Yellow, Blue to an RJ11 plug. Plug the
RJ11 connector into the Remote Trigger connection on the DTI-1.
5a. Connecting To A Russound Whole House Audio System
Connect the –Audio of the TPM-1 to the Ground connection of the Russound
paging input and the +Audio of the TPM-1 to the Signal connection of the
Russound paging input.
5b. Connecting To A Paging Amplifier
Connect the Audio OUT of the TPM-1 to the Audio IN of the paging amplifier
via a single RCA to RCA cable.
6. Plug in the 16VAC power transformer.
DTI-1 front
T elephone
Ring On/Off
TPM-1 rear
Remote
T ele-
2
Trigger
DoorBell
T elephone
1
Line (In & Out)
Device Contact B (Option Off)
Trigger Output Ground (Option On)
DoorBell Contact B
DoorBell Contact A
Device Contact A (Option Off)
Trigger Output +12V (Option On)
+Audio
BLACK
RED
BLACK
GREEN
Pressing doorbell automatically
RED
YELLOW
Power Plug
16V AC
–Audio
Russound Paging Interface
V G S T
AD 4
PAGE 1
RELAY 1
activates this relay
V G
PAG
3
Advertisement
