Page 1
TPM-1 Instruction Manual Telephone Paging Module Option Switch Audio Volume Audio Power Power Output Control Input 16VAC...
Page 2
House Audio System, you must first enable +12V trigger output by placing the Option Switch in the On position (right). 1. Connect the Audio In of the TPM-1 to the TeleDoorBell 2 connection located on the front of the DTI-1 via the included RJ11 Modular Wire.
Page 3
+Audio of the TPM-1 to the Signal connection of the Russound paging input. 5b. Connecting To A Paging Amplifier Connect the Audio OUT of the TPM-1 to the Audio IN of the paging amplifier via a single RCA to RCA cable. 6. Plug in the 16VAC power transformer.
Page 4
TPM-1. WARRANTY The Russound TPM-1 is fully guaranteed for One (1) year from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor.