GE JDS26 Use And Care Manual page 16

Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Centigrade selections.
1. Press BAKE and BROIL
BROIL
HI/LO at the same time for
BAKE
HI/LO
2 seconds until the display
shows "SF."
2. Press BROIL HI/LO. The display
BROIL
will show "F" (Fahrenheit).
HI/LO
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or
temperature, you may notice the display changes
slowly. This special feature allows you to change the
speed. To set the speed you prefer, follow these steps:
1. Press BAKE and BROIL
BROIL
HI/LO at the same time for
BAKE
HI/LO
2 seconds until the display
shows "SF."
2. Press the + pad. The display
will show you a set speed
between 1 and 5.
16
SPECIAL FEATURES
OF YOUR OVEN CONTROL
(continued)
3. Press BROIL HI/LO again. The display
BROIL
will show "C" (Centigrade).
HI/LO
4. Press START.
START
3. Press the + pad to increase the speed up
to the number 5.
—Press the – pad to decrease the speed down
to the number 1.
4. Press START to activate the setting
and leave the control set in this special
START
features mode.