Programming Instructions - GE Simon Security System User Manual

Note
If Trouble Beeps are turned
on, the panel will sound six
trouble beeps every minute
the panel cover is open. Ask
your installer if Trouble
Beeps are turned on for your
system.
Note
The Master access code is
1-2-3-4 when the panel is
shipped. You should change
your Master Access Code
after your system is installed
(see "Access Code").
14
1.
Press Down
Doors & Motion
Windows Sensors Status
H O M E S E C U R I T Y
Arm Disarm System
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
C O D E
Special
Doors Motion Time Sensor On Off
H O M E C O N T R O L
Chime Lights
E M E R G E N C Y
FIRE POLICE AUX
Test Weekly
Figure 1. Opening the panel cover

Programming Instructions

Use the following instructions to access the programming buttons and programming
decals.
1. System must be disarmed. Open the Panel Cover by pressing the plastic latch on
the top of the panel. When you open the cover you will immediately be prompted
by the panel voice to use the numbered keys to enter your ID.
Version 3
* Press for program
information.
Light
Control
*
Unit #
4
Instruction
Summary
Add Option
Option #1: Panel Beeps
Option #2: Panel Voice
Option #3: Latchkey Time
Option #36: Sensor Activated Light Lockout Start Time
Option #37: Sensor Activated Light Lockout Stop Time
Option #41: Chime Voice
Option #42: Speaker Volume
Option #43: Pager Phone Number
Option #55: Status Beep Volume
Add Option #
Press and follow voice prompts.
See Note
2. Enter the Master Access Code.
3. The system voice will prompt you to begin with the START MENU.
The START MENU includes the following buttons:
• Add
• Delete
• Cancel
2.
Open
Version 3 START MENU
Add Delete Cancel Test
System should be checked
by a qualified technician
* Press for program
at least every three years.
information. Cover
MAIN MENU
Light Sensor/ Access Clock
Control Option # Remote Code Set
* * *
0 1 2 3
Note:
CONTROL MENU
Entry/Exit
Unit # Delay Sensors Time - Hours + Hold key or press
* * * repeatedly until you
hear the desired item.
4 5 6 7 8 9
Instruction
Delete
Summary - Minutes +
To delete an option or access code
Delete
Add Option
press and follow the voice
Option #1: Panel Beeps prompting.
Option #2: Panel Voice DONE
Add Access Code
Option #3: Latchkey Time Cancel
Option #36: Sensor Activated Light Lockout Start Time Add Access Code DONE
If you make a mistake or want to
Option #37: Sensor Activated Light Lockout Stop Time Press , then
Cancel
Option #41: Chime Voice
See Note
Option #42: Speaker Volume start over press
use red numbers to enter 4-digit code.
Option #43: Pager Phone Number
Option #55: Status Beep Volume Sensor or Phone Test
Set Clock
Test
Add Option # Clock Set Hours Minutes DONE
Press and follow voice prompts. Press To select a test, press and
follow the voice prompting.
See Note See Note
START MENU
Add Delete Test
MAIN MENU
Sensor/ Access
Option # Remote Code
* *
0 1 2
CONTROL MENU
Entry/Exit
Delay Sensors -
* * *
5 6 7
- +
DONE
Add Access Code
Add Access Code DONE
Press
use red numbers to enter 4-digit code.
Set Clock
Clock Set Hours Minutes
Press
See Note
System should be checked
by a qualified technician
at least every three years.
Clock
Set
3
Note:
Hold key or press
Hours +
repeatedly until you
hear the desired item.
8 9
Delete
To delete an option or access code
Delete
press and follow the voice
prompting.
Cancel
If you make a mistake or want to
, then
Cancel
start over press
Sensor or Phone Test
Test
DONE
To select a test, press and
follow the voice prompting.
Simon Security System