Servicing Of Double-Insulated Products; Polarized Plug - HoMedics DEEPSOAK FOOT SPA Instruction Manual And Warranty Information

SERVICING OF DOUBLE-INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product, nor should a means for grounding be added to the
product. Servicing a double-insulated product requires extreme care and knowledge of the system and
should be done only by qualified service personnel. Replacement parts for a double-insulated product
must be identical to the parts they replace. A double-insulated product is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED". The symbol

POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change
the plug in any way..
INSTRUCTIONS FOR USE
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the fill line located
on the inside of the tub.
CAUTION: DO NOT FILL WATER OVER THE FILL LINE
NOTE: The footbath will not heat cold water. For a warm water massage, fill the unit with warm water.
The footbath will help to maintain warm water temperature.
2. If desired, add your own salts for a more soothing soak. A bonus trial pack is included for a single use.
3. Plug the unit into a 120 volt household outlet.
4. Press power button once to turn on vibration and heat maintenance (Fig 1).
5. While seated, place your feet in the footbath.
6. Enjoy a deep soothing massage by sliding feet back and forth over the raised nodes on the footbath
floor or over center massage roller.
may also be marked on the product.
4