Microsd ™ Card Use (Optional) - Garmin aera 190-01117-02 Pilot's Manual

appendix c
MicroSd card uSe (OPtiONal)
™
The aera uses an optional MicroSD
INSTAllING ANd REmOVING mircoSd
Install the MicroSD Card in the slot located under the battery. Install or remove the
MicroSD Card at any time, whether the unit is on or off.
You can load a variety of information to the aera internal memory or MicroSD Card,
such as MapSource detailed maps in a MapSource program.
Release Key: Slide and
Release to Open the Battery
Installing an microSd Card:
1) Slide the 'Release Key' to the right to release the battery cover. The
'Release Key' is located on the bottom right side of the unit.
2) Remove the battery to access the MicroSD card slot.
3) Firmly push the card into the unit. It is not necessary to force the card. The
handle is still exposed when it is properly inserted.
4) The unit takes a few seconds to read the card. When the data card has
been properly installed and accepted, a summary screen noting the card
details appears. Touch to acknowledge.
130
Card for storing data.
™
MicroSD™ Slot
Cover
Garmin aera 500 Series Pilot's Guide
™ CARdS
aera microSd Card Slot
190-01117-02 Rev. A