Page 1
Form No. 3435-911 Rev A Front Weight Kit Zero-Turn-Radius Riding Mower Model No. 140-2050 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. – No parts required Prepare the machine.
Page 2
Removing the Guards Installing the Weights Machines Equipped with MyRide ® Parts needed for this procedure: Only Bolt (3/8 x 1 inch) Locknut (3/8 inch) No Parts Required Left weight-mounting bracket Right weight-mounting bracket Procedure Washer Note: Retain all removed parts for later installation. Bolt (5/8 x 2-3/4 inches) Remove the bolts securing the guards on the Suitcase weight...
Page 3
Installing the Guards Machines Equipped with MyRide Only No Parts Required Procedure Insert the top of the guard under the deck; tilt the guard so that it slides under the frame and fit the guard into the notches (Figure g299192 Figure 2 Castor fork and wheel not shown for clarity.